No images associiated with GCPs

[Ben_Evans]

I have imported RTK GCPs into a project then run stage 1 - images have geolocation.

 

When I come to try to locate the GCPs in the RayCloud there are no images in which any of the GCPs appear despite most of them overlaying the survey area well. I therefore don’t think it is a coordinate system problem.Anyone have any ideas why there aren’t any images found?

Images are in WGS84, 31N with EGM 96 datum. GCPs are in OSGB/BNG, with elevations already converted from ODN to EGM96.

I looked at this thread, but it wasn’t helpful. I couldn’t fine other threads that were relevant

https://community.pix4d.com/t/4552-No-image-GCP-marker?input_string=No%20images

 

[Julie_Pichon]

Hi Ben,

We replied in the other thread but please follow up here.

Regards,

[vikram.potdar]

when i click on gcp point image did not show in right window

[Christina]

this can help:

No image - GCP marker

I had the same problem, I fixed it by using the Basic Editor of the GCP/MTP Manager  and marking each GCP on three images, hit Reoptimize, after that they started to show up in the rayCloud and the Automatic Marking option was available, hit it, and more images showed up to be able to be marked with the GCPs, I marked few more, hit Reoptimize, and I confirmed in the raycloud graphic the elevation of the model was fixed with the GCPs. some screenshots below.   model relative to GCPs before the …

Feel free to comment on the above-mentioned post so that we have all information about the issue in one place