Hi everyone,
I’m having the same problem with M2ED thermal images. I’ve mostly ruled out overlap issues, using 90% front and 80% side overlap, and I’ve tried manually entering the camera model settings, but for some reason, I’m unable to add and select only the ‘Thermal IR’ spectrum, (1000 for wavelength, 300 for bandwidth) in the camera setup menu, when I try to select it, the selection field goes blank. The same thing happens when deselecting RGB. I then see this error when trying to save the camera model settings:
As well as:
Error e0023: Select a camera model corresponding to the size and the bands of the image.
I can manually enter in the other details of the Lepton just fine, found over at:
Image resolution is 160x120 pixel
Image size of sensor: 0.164 [mm] x 0.123 [mm]
Focal length: 20 mm
When attempting to process the project, I still get: Error e0046: Processing failed. No calibrated cameras.
I’ve also tried using both latest version of Pix4D, and the older version 3.0 for Mac, and get the same exact problems on both versions, unfortunately.
Could someone be so kind as to post their exact Lepton camera settings?
Any advice would be appreciated.