Blurred Mosaic

PIX4Dmapper
1

Hi everybody!, anybody knows why this blurr happens when processing on Pix4D mapper? I understand it can be because a bad alignment of the images, but i already use 1/2 half image size on keypoint image scale and calibration method Standard. Using the full image would take forever to process.
Images are taken with a DJI Mavic 3 Multispectral, but this happens also with an Ebee X, with the SODA camera.

image
image981×750 209 KB

Thanks

2

Hello there, I would suggest changing the calibration process and see if that helps. Usually, I would recommend Alternative Calibration process if you are using Standard Calibration Process.