Hello,
I have also a ‘export-problem’. We have about 10 sites that we have to measure 20 or more stockpiles each month. Now we have to use Excel to copy by hand the results of pix4d volume calculating and use a third party software to show which stockpile is nr.1, nr.2,… Every time that we do a drone flight we have to repeat the same thing over and over. We gain a lot of time to do a drone flight and get very accurate results. But we lose a lot of time by manual do the post-processing export…
So my question is: Is it possible that there comes a export button that allows us to do an export to PDF with the following elements:
- Orthomosaic of the whole site with all the annotations that we have make on one of the first pages
- Each page below shows 1 annotation.For example:
o stockpile 1 with the location of the stockpile and the results in m³
o length of a polyline
o m² of a polygone…
o Height of a point
o Cross section
o …
We use Pix4d BIM, so if the export button arrives. Can you integrate it to the Pix4d BIM so that if we share results to other people that they can calculate volumes or define lengths and export this to a PDF?
Trimble stratus for example has this already, so you can see there how it looks like.
Thanks for the feedback!
Kind regards.