# Zenmuse XT2 processing

**URL:** <https://community.pix4d.com/t/zenmuse-xt2-processing/8329>\
**Category:** PIX4Dmapper Questions/Troubleshooting\
**Tags:** thermal\
**Created:** [May 17, 2019, 3:53am UTC](https://community.pix4d.com/t/zenmuse-xt2-processing/8329 "2019-05-17T03:53:57Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Dan\_Yakir](https://avatars.discourse-cdn.com/v4/letter/d/0ea827/32.png) [@Dan\_Yakir](https://community.pix4d.com/u/Dan_Yakir)\
**Post date:** [August 26, 2019, 7:13am UTC](https://community.pix4d.com/t/zenmuse-xt2-processing/8329/5 "2019-08-26T07:13:44Z")

</div>

Hi Jason

I have calibrated the Zenmuse XT2, find the settings in [this thread](https://community.pix4d.com/t/dji-zenmuse-xt2-calibrated-camera-rgb-and-thermal-19mm/8958). Note that for the thermal camera, as I only have the 19mm lens, that’s what I managed to calibrate. But the RGB should be fine for all XT2 cameras. Good luck

---

_[View the full topic](https://community.pix4d.com/t/zenmuse-xt2-processing/8329)._