# Volume report Incorrect Elevations **URL:** \ **Category:** PIX4Dsurvey Questions/Troubleshooting\ **Created:** [July 5, 2024, 10:03pm UTC](https://community.pix4d.com/t/volume-report-incorrect-elevations/30628 "2024-07-05T22:03:40Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![jex](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jex](https://community.pix4d.com/u/jex)\ **Post date:** [July 5, 2024, 10:03pm UTC](https://community.pix4d.com/t/volume-report-incorrect-elevations/30628/1 "2024-07-05T22:03:40Z")
When I generate my volume reports the maximum Elevation does not match up with the elevation on the top of the stock pile. Is this the max elevation at the bottom of the stock pile? Has anyone else had this issue? ![pix 4d Community](https://global.discourse-cdn.com/pix4d/original/2X/e/e1c9db6670e457eed86f6c69ecddff751541112e.jpeg) ![Pix4d community 2](https://global.discourse-cdn.com/pix4d/original/2X/a/ae455d857c89d19353b6bd1cc247d336fcc19567.jpeg) ---
**Author:** ![diana.araujo](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/diana.araujo/32/8621_2.png) [@diana.araujo](https://community.pix4d.com/u/diana.araujo)\ **Post date:** [October 7, 2024, 9:41am UTC](https://community.pix4d.com/t/volume-report-incorrect-elevations/30628/2 "2024-10-07T09:41:09Z")
Hi @jex , First and foremost, sorry for the late reply. I shared your question with the team and the “maximum elevation” that you see in the Propertis panel when you select the volume is referring to the base polygon. It does not refer to the Volume’s height and that is why it’s not matching with the elevation of the marker. I understand that this might be confusing for the user so, as the UX designer, I’ll try to improve how the information is displayed here. Let me know if this was helpful or if you need any further assistance. Best regards, Diana