# review mapper gcps

**URL:** <https://community.pix4d.com/t/review-mapper-gcps/31032>\
**Category:** PIX4Dmapper\
**Created:** [August 27, 2024, 6:51pm UTC](https://community.pix4d.com/t/review-mapper-gcps/31032 "2024-08-27T18:51:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryan\_Beisaw](https://avatars.discourse-cdn.com/v4/letter/r/45deac/32.png) [@Ryan\_Beisaw](https://community.pix4d.com/u/Ryan_Beisaw)\
**Post date:** [August 27, 2024, 6:51pm UTC](https://community.pix4d.com/t/review-mapper-gcps/31032/1 "2024-08-27T18:51:29Z")

</div>

I have an old job i processed in mapper and would like to go back and review what xyz values were used for gcp’s on the job. Can that be done anywhere without a license to mapper anymore? We now just utilize matic and i understand they are not compatible?

---

<div class="post-metadata">

**Author:** ![jaja6009](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@jaja6009](https://community.pix4d.com/u/jaja6009)\
**Post date:** [August 29, 2024, 10:19pm UTC](https://community.pix4d.com/t/review-mapper-gcps/31032/2 "2024-08-29T22:19:06Z")

</div>

Yes.  
You can use Pix4Dmapper in Discovery mode to open previously processed projects.  
This will allow you to view your Control Points.
