# Point Density setting

**URL:** <https://community.pix4d.com/t/point-density-setting/8639>\
**Category:** PIX4Dmapper Questions/Troubleshooting\
**Created:** [July 5, 2019, 10:41pm UTC](https://community.pix4d.com/t/point-density-setting/8639 "2019-07-05T22:41:57Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Alice\_Bonfiglio](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/alice_bonfiglio/32/291_2.png) [@Alice\_Bonfiglio](https://community.pix4d.com/u/Alice_Bonfiglio)\
**Post date:** [June 11, 2021, 12:15pm UTC](https://community.pix4d.com/t/point-density-setting/8639/4 "2021-06-11T12:15:27Z")

</div>

Bonjour @julien.guerry ,

The number of points can be read a posteriori after processing Step 2 from the quality report.

 ![image](https://global.discourse-cdn.com/pix4d/original/2X/1/1654868cf4d51304a04d949ad781babcf78c471a.png)

The factor 4 or 16 is defined by Pix4D in order to decide how many additional points must be created. I remind you that the purpose of the densification is to densify the cloud of points generated during step 1, those we refer to as [Automatic Tie Points](https://support.pix4d.com/hc/en-us/articles/115000140963-Tie-points-in-photogrammetry-project-ATP-GCP-MTP-and-CP). You can find additional information at [https://support.pix4d.com/hc/en-us/articles/203269885-How-many-Points-are-generated-during-step-2-Point-Cloud-and-Mesh](https://support.pix4d.com/hc/en-us/articles/203269885-How-many-Points-are-generated-during-step-2-Point-Cloud-and-Mesh).

For your case, it is correct to say that one 3D point is computed every 4/(0.5) = 8 pixels of the original image. Could you point me to the place where it says that with the “Optimal” option a 3D point is created for each pixel of the image?

---

_[View the full topic](https://community.pix4d.com/t/point-density-setting/8639)._
