# Pix4Dmapper processing mobile imagery

**URL:** <https://community.pix4d.com/t/pix4dmapper-processing-mobile-imagery/24839>\
**Category:** PIX4Dmapper\
**Created:** [December 9, 2022, 6:12pm UTC](https://community.pix4d.com/t/pix4dmapper-processing-mobile-imagery/24839 "2022-12-09T18:12:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![curryc](https://avatars.discourse-cdn.com/v4/letter/c/e47774/32.png) [@curryc](https://community.pix4d.com/u/curryc)\
**Post date:** [December 9, 2022, 6:12pm UTC](https://community.pix4d.com/t/pix4dmapper-processing-mobile-imagery/24839/1 "2022-12-09T18:12:06Z")

</div>

We are test processing some mobile imagery from a mobile camera but don’t know how the attached camera calibration settings correlate to what needs to be entered into the Pix4d camera parameters. I was able to get the cameras geolocated and most of them calibrated but now need to figure out how to edit the generic camera. I also attached a quality report from an initial process for a small number of images. Thanks for any help… trying to figure out a way to not have to load all of the individual images into our software for road feature mapping.

[WISDOT\_10\_25\_2022-pavementcam1 (2452x2056@0,0).TopoDOT.txt](https://community.pix4d.com/uploads/short-url/zAEX0Wvp3JnpizBLyfM03tndjoi.txt) (311 Bytes)

[test\_report.pdf](https://community.pix4d.com/uploads/short-url/eFknq1i5yJFkXxvADymNqm0FrWg.pdf) (262.6 KB)

---

<div class="post-metadata">

**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\
**Post date:** [December 14, 2022, 7:20pm UTC](https://community.pix4d.com/t/pix4dmapper-processing-mobile-imagery/24839/2 "2022-12-14T19:20:34Z")

</div>

Hi curryc,  
It sounds like you need to calibrate the camera and add it to the database. The article below describes how to do that.

> **[How to calibrate a Perspective Lens Camera](https://support.pix4d.com/hc/en-us/articles/206065716-How-to-calibrate-a-Perspective-Lens-Camera)**
>
> Pix4Dmapper requires as input the internal parameters of the camera used to acquire the images for processing. These parameters are used for the 3D reconstruction and therefore, it is crucial that ...