# Pix4D Mapper ---- DJI Mavic 3T support
**URL:** https://community.pix4d.com/t/pix4d-mapper-dji-mavic-3t-support/29454
**Category:** PIX4Dmapper Questions/Troubleshooting
**Created:** [March 5, 2024, 7:51pm UTC](https://community.pix4d.com/t/pix4d-mapper-dji-mavic-3t-support/29454 "2024-03-05T19:51:29Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@srikanth.gorthi](https://community.pix4d.com/u/srikanth.gorthi)
#### Post date: [March 5, 2024, 7:51pm UTC](https://community.pix4d.com/t/pix4d-mapper-dji-mavic-3t-support/29454/1 "2024-03-05T19:51:29Z")
I understand that pix4dmapper have some issues with stitching the radiometric orthomosaic. I tried to process the RJPEG using the DJI thermal SDK but couldn’t get a good stitching map. Does pix4d plan to integrate the thermal sdk into the mapper in future? Thanks!
---
### Author:  [@Mike\_K](https://community.pix4d.com/u/Mike_K)
#### Post date: [March 6, 2024, 7:13pm UTC](https://community.pix4d.com/t/pix4d-mapper-dji-mavic-3t-support/29454/2 "2024-03-06T19:13:50Z")
Hi Srikanth,
We recommend using a third-party software called ATygeo. It can convert the DJI thermal images to something compatible with PIX4D.
> **[ATygeo Thermal | Conversion to TIFF from DJI M3T | ATyges ®](https://atyges.es/en/product/atygeo-thermal-m3t-en/)**
>
> ATygeo Thermal. ⭐ ATyges, Drone Specialists . ✅【DJI Oficial Reseller】✅.
---
### Author:  [@srikanth.gorthi](https://community.pix4d.com/u/srikanth.gorthi)
#### Post date: [March 7, 2024, 1:09am UTC](https://community.pix4d.com/t/pix4d-mapper-dji-mavic-3t-support/29454/3 "2024-03-07T01:09:51Z")
is there any software available in US the website does not seem to be a legit one though!