# Phantom 4 Multispectral and PPK processing

**URL:** <https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868>\
**Category:** PIX4Dmapper\
**Created:** [July 28, 2020, 8:18am UTC](https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868 "2020-07-28T08:18:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![martijnvdhelm](https://avatars.discourse-cdn.com/v4/letter/m/c77e96/32.png) [@martijnvdhelm](https://community.pix4d.com/u/martijnvdhelm)\
**Post date:** [July 28, 2020, 8:18am UTC](https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868/1 "2020-07-28T08:18:16Z")

</div>

Hi,

I’d like to ask some questions about PPK and how to use it.  
Is it possible to use PPK when working with the Phantom 4 Multispectral from DJI?  
The base-station I have is a Trimble SPS852 that stores data in either RINEX or .T02 (Trimble format); does Pix4D Mapper support these formats and can I post process the data using this software?

Thanks in advance,  
Martijn

---

<div class="post-metadata">

**Author:** ![kyle.canning](https://avatars.discourse-cdn.com/v4/letter/k/f1d935/32.png) [@kyle.canning](https://community.pix4d.com/u/kyle.canning)\
**Post date:** [July 29, 2020, 10:15pm UTC](https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868/2 "2020-07-29T22:15:03Z")

</div>

You dont PPK images in Pix4D. Use whatever software is provided for your DJI and then bring the geo tagged images into Pix4D after

---

<div class="post-metadata">

**Author:** ![Beata](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/beata/32/187_2.png) [@Beata](https://community.pix4d.com/u/Beata)\
**Post date:** [July 30, 2020, 8:27am UTC](https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868/3 "2020-07-30T08:27:59Z")

</div>

Hi,  
@kyle.canning is right. Also, remember that the omega, phi, kappa has to be included in the post-processed file. You can do it by:

1. Importing the images to Pix4Dmapper.
2. Exporting it to the file.
3. Replacing X, Y, Z with the correct coordinates.
4. Include the angles.
5. Saving and importing the prepared file again.

Side note, Pix4Dmapper supports the DJI Phantom 4 Multispectral from version 4.5.3.

Regards

---

<div class="post-metadata">

**Author:** ![martijnvdhelm](https://avatars.discourse-cdn.com/v4/letter/m/c77e96/32.png) [@martijnvdhelm](https://community.pix4d.com/u/martijnvdhelm)\
**Post date:** [July 30, 2020, 9:02am UTC](https://community.pix4d.com/t/phantom-4-multispectral-and-ppk-processing/13868/4 "2020-07-30T09:02:08Z")

</div>

Thanks for the explanation! Much appreciated!