# orthophoto output problem

**URL:** <https://community.pix4d.com/t/orthophoto-output-problem/23939>\
**Category:** PIX4Dmapper\
**Created:** [September 16, 2022, 4:07pm UTC](https://community.pix4d.com/t/orthophoto-output-problem/23939 "2022-09-16T16:07:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![user2](https://avatars.discourse-cdn.com/v4/letter/u/ecb155/32.png) [@user2](https://community.pix4d.com/u/user2)\
**Post date:** [September 16, 2022, 4:07pm UTC](https://community.pix4d.com/t/orthophoto-output-problem/23939/1 "2022-09-16T16:07:49Z")

</div>

hello pix4d  
hope you are doing well, i have a common problem in each output the problem is state in the following image

 ![Screenshot 2022-09-16 190324](https://global.discourse-cdn.com/pix4d/original/2X/2/2cea3707c800d33f5459e7dbb5843de95c883603.jpeg)  
as you can see the wall is not clear enough I’m using DJI Phantom 4 RTK.  
in addition to that i don’t need the point cloud and mesh i disabled that before starting is this causing the issue ?

---

<div class="post-metadata">

**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\
**Post date:** [September 16, 2022, 7:15pm UTC](https://community.pix4d.com/t/orthophoto-output-problem/23939/2 "2022-09-16T19:15:19Z")

</div>

Hello,

If you do not generate a point cloud then the orthomosaic will be constructed upon the sparse point cloud. It is very likely the reason why you are seeing this problem. I would suggest generating the dense point cloud in step 2 - but you can set the density to low. This should help better reconstruct your project.