# Orthomosaic Facade with PIX4Dmatic **URL:** \ **Category:** PIX4Dmatic Questions/Troubleshooting\ **Created:** [October 25, 2023, 4:44pm UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196 "2023-10-25T16:44:27Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![mpowell](https://avatars.discourse-cdn.com/v4/letter/m/779978/32.png) [@mpowell](https://community.pix4d.com/u/mpowell)\ **Post date:** [October 25, 2023, 4:44pm UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/1 "2023-10-25T16:44:27Z")
I have taken aerial photography of the North face of a skyscraper. I need to stitch all these together and make a single orthomosiac facade photo. Is this possible with PIX4Dmatic? I can create a 3d model of the entire building, but I do not want a top-down perspective, just a picture of a single side of the building. ---
**Author:** ![diana.araujo](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/diana.araujo/32/8621_2.png) [@diana.araujo](https://community.pix4d.com/u/diana.araujo)\ **Post date:** [October 26, 2023, 6:51am UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/2 "2023-10-26T06:51:26Z")
Hello, It is not possible yet to do an ortho facade in PIX4Dmatic but it’s a feature that we have already been discussing with the development team. You can add this and other feature requests that you might have in the following page [PIX4Dmatic Feature Request - Pix4D Community](https://community.pix4d.com/c/pix4dmatic/pix4dmatic-feature-request/97). Best, Diana ---
**Author:** ![Daniele\_Lecci](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/daniele_lecci/32/9493_2.png) [@Daniele\_Lecci](https://community.pix4d.com/u/Daniele_Lecci)\ **Post date:** [October 26, 2023, 7:38am UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/3 "2023-10-26T07:38:02Z")
Hi @mpowell, Welcome to the Pix4D Community 🤝 . There is a thread for this request here: > [@orthomosaics of facades](https://community.pix4d.com/t/orthomosaics-of-facades/24679): > > Hello, With Pix4Dmatic, would it be possible to have to make orthomosaics of facades like on Pix4dmapper? Thanks in advance. Please add your vote and add a post describing your use case. Cheers, Daniele ---
**Author:** ![Anastasis\_Spachos](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/anastasis_spachos/32/7061_2.png) [@Anastasis\_Spachos](https://community.pix4d.com/u/Anastasis_Spachos)\ **Post date:** [September 2, 2024, 2:00pm UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/4 "2024-09-02T14:00:43Z")
Hello, We’re pleased to announce that the 1.66 Preview includes a new feature: the ability to create an **orthoplane**. This addition makes it easier than ever to generate accurate orthoplanes, enhancing your workflow and expanding your creative possibilities. Give it a try and see how it can elevate your projects! > **[Download Pix4D software](https://www.pix4d.com/download-software/)** > > Download Pix4D software through our download center Best regards, ---
**Author:** ![limmenglee1991](https://avatars.discourse-cdn.com/v4/letter/l/e9c0ed/32.png) [@limmenglee1991](https://community.pix4d.com/u/limmenglee1991)\ **Post date:** [November 28, 2024, 12:04am UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/5 "2024-11-28T00:04:07Z")
Hello, is there a guide or article about how to implement the orthoplane feature in Pix4DMatic? ---
**Author:** ![Pierangelo\_Rothenbuhler](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/pierangelo_rothenbuhler/32/2439_2.png) [@Pierangelo\_Rothenbuhler](https://community.pix4d.com/u/Pierangelo_Rothenbuhler)\ **Post date:** [November 28, 2024, 1:01pm UTC](https://community.pix4d.com/t/orthomosaic-facade-with-pix4dmatic/28196/6 "2024-11-28T13:01:16Z")
@limmenglee1991 here you go: [Section view - PIX4Dmatic](https://support.pix4d.com/hc/en-us/articles/364543812711#Orthoplane)