# Orthomosaic are a right location but can't measue on it

**URL:** <https://community.pix4d.com/t/orthomosaic-are-a-right-location-but-cant-measue-on-it/30853>\
**Category:** PIX4Dcloud Questions/Troubleshooting\
**Created:** [August 2, 2024, 5:35am UTC](https://community.pix4d.com/t/orthomosaic-are-a-right-location-but-cant-measue-on-it/30853 "2024-08-02T05:35:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lb1](https://avatars.discourse-cdn.com/v4/letter/l/9fc348/32.png) [@lb1](https://community.pix4d.com/u/lb1)\
**Post date:** [August 2, 2024, 5:35am UTC](https://community.pix4d.com/t/orthomosaic-are-a-right-location-but-cant-measue-on-it/30853/1 "2024-08-02T05:35:18Z")

</div>

I’m new here and uploaded my first orthomosaic to cloud, ecerything looks fine, right geolocation, great resolution but when I’m trying to measure on it, ruler show 0.00m and I can’t measure anything.

Orthomosaic generated with Agisoft Metashape Pro.

What is wrong? Please help me.

Thank you! 🙂

---

<div class="post-metadata">

**Author:** ![Heydi\_Contreras](https://avatars.discourse-cdn.com/v4/letter/h/cc9497/32.png) [@Heydi\_Contreras](https://community.pix4d.com/u/Heydi_Contreras)\
**Post date:** [June 11, 2025, 10:32am UTC](https://community.pix4d.com/t/orthomosaic-are-a-right-location-but-cant-measue-on-it/30853/2 "2025-06-11T10:32:48Z")

</div>

Hello @lb1

Please verify that your orthomosaic has been generated in a projected coordinate system. If you are interested in measuring volume, note that the DSM must also be included in the project.

If the problem persists, please open a support ticket.

Best regards