# Multispectral EO imagery

**URL:** <https://community.pix4d.com/t/multispectral-eo-imagery/5744>\
**Category:** PIX4Dmapper Questions/Troubleshooting\
**Created:** [December 1, 2016, 1:07pm UTC](https://community.pix4d.com/t/multispectral-eo-imagery/5744 "2016-12-01T13:07:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brett\_Horton](https://avatars.discourse-cdn.com/v4/letter/b/258eb7/32.png) [@Brett\_Horton](https://community.pix4d.com/u/Brett_Horton)\
**Post date:** [December 1, 2016, 1:07pm UTC](https://community.pix4d.com/t/multispectral-eo-imagery/5744/1 "2016-12-01T13:07:56Z")

</div>

Is it possible to create an EO (Electro-optical) image from the RED / Blue / Green sensors on a Micasense Red Edge camera in Pix 4d?

&nbsp;

---

<div class="post-metadata">

**Author:** ![Marc\_Desgroseilliers](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/marc_desgroseilliers/32/187_2.png) [@Marc\_Desgroseilliers](https://community.pix4d.com/u/Marc_Desgroseilliers)\
**Post date:** [December 9, 2016, 8:00am UTC](https://community.pix4d.com/t/multispectral-eo-imagery/5744/2 "2016-12-09T08:00:32Z")

</div>

Dear Brett,

The Pix4D&nbsp;software will put together the information on the different bands into coherent reflectance maps. The sensors of the Red Edge capture discrete bands, and so the data in the rest of the spectrum cannot be extrapolated. As such, only the data recorded on these bands will be available in Pix4D.

Best regards,