# Matic failed at Densify

**URL:** <https://community.pix4d.com/t/matic-failed-at-densify/23336>\
**Category:** PIX4Dmatic Questions/Troubleshooting\
**Created:** [July 22, 2022, 2:51pm UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336 "2022-07-22T14:51:33Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@brent](https://community.pix4d.com/u/brent)\
**Post date:** [July 22, 2022, 2:51pm UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336/1 "2022-07-22T14:51:33Z")

</div>

Hi. My p4d Matic is failing at the densification phase of processing. I have run it like 7 times. It was working fine last week. I have even installed the new version.  
I’ve checked my license is up to date and working and I even got a new license ahead of schedule.  
Please advise as I can’t work without it.

---

<div class="post-metadata">

**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\
**Post date:** [July 22, 2022, 8:08pm UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336/2 "2022-07-22T20:08:32Z")

</div>

Hi Brent,  
Can you attach the program log files and quality report? We can take a look and let you know what might be going on.

---

<div class="post-metadata">

**Author:** ![brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@brent](https://community.pix4d.com/u/brent)\
**Post date:** [July 23, 2022, 7:28am UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336/3 "2022-07-23T07:28:18Z")

</div>

Hi Mike

Please see the attached log.

There is no quality report as the process fails before that point.

Please advise

[2022-07-23\_07-45-16.txt](https://community.pix4d.com/uploads/short-url/6VDyd5b0BHY2BtlU0CbyScwivMF.txt) (807 KB)

---

<div class="post-metadata">

**Author:** ![Pierangelo\_Rothenbuhler](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/pierangelo_rothenbuhler/32/2439_2.png) [@Pierangelo\_Rothenbuhler](https://community.pix4d.com/u/Pierangelo_Rothenbuhler)\
**Post date:** [July 25, 2022, 9:10am UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336/4 "2022-07-25T09:10:35Z")

</div>

@brent there is not enough disk space remaining, you can see it in the log in the following place:

 ![image](https://global.discourse-cdn.com/pix4d/original/2X/2/2cfb341673222041ab9464748adf4c6b7b8d0888.png)

Please make some space on your hard drive and it should work again.

---

<div class="post-metadata">

**Author:** ![brent](https://avatars.discourse-cdn.com/v4/letter/b/ec9cab/32.png) [@brent](https://community.pix4d.com/u/brent)\
**Post date:** [July 25, 2022, 11:02am UTC](https://community.pix4d.com/t/matic-failed-at-densify/23336/5 "2022-07-25T11:02:35Z")

</div>

Hi there

Thank you for that.  
I’ve just checked my drives and you are100% correct. It is full. 1TB space all used up.