# Issue after calibrating images

**URL:** <https://community.pix4d.com/t/issue-after-calibrating-images/25929>\
**Category:** PIX4Dmatic\
**Created:** [March 29, 2023, 7:55pm UTC](https://community.pix4d.com/t/issue-after-calibrating-images/25929 "2023-03-29T19:55:41Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![joelwhitlock98](https://avatars.discourse-cdn.com/v4/letter/j/8dc957/32.png) [@joelwhitlock98](https://community.pix4d.com/u/joelwhitlock98)\
**Post date:** [March 29, 2023, 7:55pm UTC](https://community.pix4d.com/t/issue-after-calibrating-images/25929/1 "2023-03-29T19:55:41Z")

</div>

![image](https://global.discourse-cdn.com/pix4d/original/2X/7/727ec68e93b533cf7464a61a6d240ff690ac4bed.jpeg)

Hi,

After uploading images to the project and calibrating it seems to move the images really far away from where they are supposed to be. The position of the cameras initial image is perfectly fine and this project is made of 1300 images. the rest are fine its just this corner of the job I have isolated that seems not to be calibrating properly.

Not sure on where to start to fix this.

Using A mavic 3 enterprise that was using a ntrip corrections. 99.9% fix

---

<div class="post-metadata">

**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\
**Post date:** [March 29, 2023, 8:21pm UTC](https://community.pix4d.com/t/issue-after-calibrating-images/25929/2 "2023-03-29T20:21:45Z")

</div>

Hi joel  
Can you try the accurate geolocation and orientation pipeline? It should fix this problem.

---

<div class="post-metadata">

**Author:** ![joelwhitlock98](https://avatars.discourse-cdn.com/v4/letter/j/8dc957/32.png) [@joelwhitlock98](https://community.pix4d.com/u/joelwhitlock98)\
**Post date:** [March 29, 2023, 8:34pm UTC](https://community.pix4d.com/t/issue-after-calibrating-images/25929/3 "2023-03-29T20:34:54Z")

</div>

![image](https://global.discourse-cdn.com/pix4d/original/2X/3/37518d2105cd491d9fa567d0e9ee5e8756c619e8.jpeg)  
Hi,

i also tried this and re calibrated however data still seems to be wrong. again its only in this area and I dont understand why as it was all done in 1 mission with rtk fix

note the cameras are now in the right location however the data is still incorrect as the land does not slope in the direction that the screenshot shows

thank you for the fast reply

---

<div class="post-metadata">

**Author:** ![Yoko\_Rader](https://avatars.discourse-cdn.com/v4/letter/y/51bf81/32.png) [@Yoko\_Rader](https://community.pix4d.com/u/Yoko_Rader)\
**Post date:** [April 5, 2023, 7:12pm UTC](https://community.pix4d.com/t/issue-after-calibrating-images/25929/4 "2023-04-05T19:12:26Z")

</div>

Hi Joel,

Could you post your quality report and we can take a deeper look.