# Industrial Plant - 3D Model

**URL:** <https://community.pix4d.com/t/industrial-plant-3d-model/32010>\
**Category:** PIX4Dmapper\
**Created:** [October 15, 2024, 12:44pm UTC](https://community.pix4d.com/t/industrial-plant-3d-model/32010 "2024-10-15T12:44:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![isipix4d](https://avatars.discourse-cdn.com/v4/letter/i/839c29/32.png) [@isipix4d](https://community.pix4d.com/u/isipix4d)\
**Post date:** [October 15, 2024, 12:44pm UTC](https://community.pix4d.com/t/industrial-plant-3d-model/32010/1 "2024-10-15T12:44:02Z")

</div>

Hello,

I have an industrial plant that covers approximately 0,25km2 (0.1mi2).  
My plant have 2 furnaces/towers 200’ height.

I want to create the best 3d possible with a Mavic 3E drone. I’m new to this but willing to learn!

I plan to create multiple flight. (orthomosaic, ortho with gimble at an angle; 45deg?, and facade flight)

I would like to get some tips for my flight planning. (distance, height, gamble angle, number of flight, technique, etc).

I will be using pix4dmatic and or pix4dmapper for doing the 3D.

I have an RS3 base station and going to have a certain number of GCP (to determine).  
I’m also considering doing ground scan for scanning equipement with another device. (cellphone and pix4dcapturepro? not sure how to reference rtk/ppk)

In summary, I would like to have your advice on the process and techniques to speed up my learning curve! 🙂

 ![DJI_0649](https://global.discourse-cdn.com/pix4d/original/2X/6/62863704e6743dbd7b07d983e1ec1ecf59d9048d.jpeg)

Thanks!  
JP

---

<div class="post-metadata">

**Author:** ![isipix4d](https://avatars.discourse-cdn.com/v4/letter/i/839c29/32.png) [@isipix4d](https://community.pix4d.com/u/isipix4d)\
**Post date:** [October 29, 2024, 12:45pm UTC](https://community.pix4d.com/t/industrial-plant-3d-model/32010/2 "2024-10-29T12:45:24Z")

</div>

Anyone? 🙂