# GCP Coordinate Selection - EVRF2000

**URL:** <https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718>\
**Category:** PIX4Dmapper\
**Created:** [May 23, 2022, 1:05pm UTC](https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718 "2022-05-23T13:05:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Phil](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@Phil](https://community.pix4d.com/u/Phil)\
**Post date:** [May 23, 2022, 1:05pm UTC](https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718/1 "2022-05-23T13:05:28Z")

</div>

Hi!

I use the Emlid RS+ GNSS receiver to measure the coordinates for my GCPs with EPSG:25833 as horizontal coordinate system and EPSG:9274 (Austria height).

It is possible to choose CS EPSG: 25833 as “Known CS” but  
what should i select for the “Vertical CS”? EPSG:9274 (Austria height) is nowhere  
to find in the dropdown.

Looking really forward to hearing from you!

Best regards,  
Phil

---

<div class="post-metadata">

**Author:** ![Daniele\_Lecci](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/daniele_lecci/32/9493_2.png) [@Daniele\_Lecci](https://community.pix4d.com/u/Daniele_Lecci)\
**Post date:** [May 24, 2022, 7:13am UTC](https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718/2 "2022-05-24T07:13:41Z")

</div>

Hi @Phil,

Thank you for your request.  
Note that PIX4Dmapper only allows the following vertical coordinate system:

- egm84
- egm96
- egm2008

If the area of interest is relatively small, you can define an offset height from the WGS84 Ellipsoid.

You can find additional information here:

> **[Select Image / GCP / Output Coordinate System](https://support.pix4d.com/hc/en-us/articles/202558239-Select-Image-GCP-Output-Coordinate-System#label12)**
>
>  
> 
> Access: For:
> 
> 
> Images: On the Menu bar, click Project \> Image Properties Editor..., on Coordinate System, click Edit...
> 
> 
> GCPs: On the Menu bar, click Project \> GCP/MTP Manager..., on GCP ...

Also note that the EPSG:9274 vertical CS is available in PIX4Dmatic:

> **[How to use vertical coordinate systems and geoids - PIX4Dmatic](https://support.pix4d.com/hc/en-us/articles/360044174411-How-to-use-vertical-coordinate-systems-and-geoids-PIX4Dmatic#list_of_supported_geoid_models)**
>
> This article explains how to select the correct vertical coordinate reference system, geoid, or geoid height in PIX4Dmatic.
> 
> 
>  
> 
> What is a geoid model: The geoid is defined based on the earth's gra...

---

<div class="post-metadata">

**Author:** ![Phil](https://avatars.discourse-cdn.com/v4/letter/p/e95f7d/32.png) [@Phil](https://community.pix4d.com/u/Phil)\
**Post date:** [May 24, 2022, 8:21am UTC](https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718/3 "2022-05-24T08:21:32Z")

</div>

Hi @Daniele_Lecci,

thank you for your fast response!  
For the next time I will definitly go for Pix4Dmatic but this time I have to solve the problem  
somehow.

> define an offset height from the WGS84 Ellipsoid

What would you suggest the right offset should be?

Thank you for the links!

Regards Phil

---

<div class="post-metadata">

**Author:** ![Daniele\_Lecci](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/daniele_lecci/32/9493_2.png) [@Daniele\_Lecci](https://community.pix4d.com/u/Daniele_Lecci)\
**Post date:** [May 24, 2022, 12:56pm UTC](https://community.pix4d.com/t/gcp-coordinate-selection-evrf2000/22718/4 "2022-05-24T12:56:26Z")

</div>

Hi Phil,

The offset will depend on the area of interest and might change over large areas. The offset is the difference between the elevation over the WGS84 Ellipsoid and the elevation according to EPSG:9274.

In fact, once you select the horizontal Coordinate System to be EPSG:25833, the interface will change and will ask for the offset above the **GRS 1980 Ellipsoid**.

Doing a fast online search I have found this map (external link):  
[https://www.isgeoid.polimi.it/Geoid/Europe/Austria/austria2008\_g.html](https://www.isgeoid.polimi.it/Geoid/Europe/Austria/austria2008_g.html)

I’m not 100% sure that this is the map you need. Please verify with the local Austrian provider if they can provide a detailed offset calculation according to the region your project is located.

best regards,  
Daniele
