# Gap in image **URL:** \ **Category:** PIX4Dmapper\ **Created:** [June 8, 2022, 8:45pm UTC](https://community.pix4d.com/t/gap-in-image/22915 "2022-06-08T20:45:29Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 8, 2022, 8:45pm UTC](https://community.pix4d.com/t/gap-in-image/22915/1 "2022-06-08T20:45:29Z")
I flew this job and processed it as I normally do, however, this time I have a large hole in my map. There are no ray clouds over the gap. Did the drone not take pictures in this area? [Agave Highlands 060722\_report.pdf](https://community.pix4d.com/uploads/short-url/hfASwk63k8i7H75YhRtgRWalaqZ.pdf) (2.8 MB) ---
**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\ **Post date:** [June 9, 2022, 8:44pm UTC](https://community.pix4d.com/t/gap-in-image/22915/2 "2022-06-09T20:44:15Z")
Hi msmith, First, you have very high camera optimization error. I would enable All Prior and reprocess. This will force the optimal internal parameters to be close to the initial values. If it still has problems let us know. ![All Prior (Highlighted)](https://global.discourse-cdn.com/pix4d/original/2X/d/ded10d4f4530372bbcbfdf69cd1043bdea1f5974.png) ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 9, 2022, 8:56pm UTC](https://community.pix4d.com/t/gap-in-image/22915/3 "2022-06-09T20:56:11Z")
Will do, thank you! ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 10, 2022, 12:57am UTC](https://community.pix4d.com/t/gap-in-image/22915/4 "2022-06-10T00:57:49Z")
I reprocessed the image but half of the image was missing although the quality is much better from what I can see. ---
**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\ **Post date:** [June 10, 2022, 2:36pm UTC](https://community.pix4d.com/t/gap-in-image/22915/5 "2022-06-10T14:36:21Z")
Can you attach the updated quality report? ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 10, 2022, 3:34pm UTC](https://community.pix4d.com/t/gap-in-image/22915/6 "2022-06-10T15:34:02Z")
Its showing that the GCP’s are not marked for some reason. I have them marked unless they lose their properties after I played with the settings? Its definitely a calibration GCP problem of some kind. Im just not sure how to go about fixing it. The initial hole in the image is now gone which tells me its a processing error and not an error with the flight. [Agave Highlands 061022\_report.pdf](https://community.pix4d.com/uploads/short-url/lHXtWzXdzjO7Lv09lbzhV4DZUiJ.pdf) (1.4 MB) ---
**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\ **Post date:** [June 10, 2022, 4:37pm UTC](https://community.pix4d.com/t/gap-in-image/22915/7 "2022-06-10T16:37:31Z")
I don’t know if you have orientation geotags, but you can try either Alternative or Accurate Geolocation and Orientation as your calibration method. ![Alternative-All Prior](https://global.discourse-cdn.com/pix4d/original/2X/c/cb069c9f7305381ce77d6c2a18f45f8d642df3bb.png) ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 10, 2022, 5:49pm UTC](https://community.pix4d.com/t/gap-in-image/22915/8 "2022-06-10T17:49:33Z")
I tried processing it again. I just went through the initial process to see a preview and what I got looked great but it only covers part of the site again. Its a different portion of the site for some reason. I dont know why I would get two different portions of the site processed from the same image? Take a look at my ray cloud. Why is it showing some images tied to a GCP but not others, even though I have them tagged? I tried changing the calibration method but it would not allo me to, it says all images must be geolocated and oriented to use those methods. [AGAVE HIGHLANDS GOLFCOURSE 061022\_report.pdf](https://community.pix4d.com/uploads/short-url/iAtjZPvQtIh0KbfccwosgjVRTRd.pdf) (1.2 MB) ![AGAVE HIGHLANDS RAY CLOUD](https://global.discourse-cdn.com/pix4d/original/2X/6/6e9c1afc6f7c1d27be7a2f926d8b21944ba2f2e7.png) ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 10, 2022, 7:08pm UTC](https://community.pix4d.com/t/gap-in-image/22915/9 "2022-06-10T19:08:43Z")
100% CALIBRATION! Thank you for your help! ---
**Author:** ![msmith](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@msmith](https://community.pix4d.com/u/msmith)\ **Post date:** [June 13, 2022, 2:43pm UTC](https://community.pix4d.com/t/gap-in-image/22915/10 "2022-06-13T14:43:06Z")
Spoke too soon! Everything looked good in pre-process however now I have striping in my ortho… [Agave Highlands 060722\_report.pdf](https://community.pix4d.com/uploads/short-url/hkI1uhMZDbnbIb1XLiN9Bs4LcBk.pdf) (2.8 MB) ![agave highlands ortho](https://global.discourse-cdn.com/pix4d/original/2X/2/26580c96a17dca5b600831be9921fafd142f76cf.png) ---
**Author:** ![Mike\_K](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mike_k/32/4697_2.png) [@Mike\_K](https://community.pix4d.com/u/Mike_K)\ **Post date:** [June 13, 2022, 5:12pm UTC](https://community.pix4d.com/t/gap-in-image/22915/11 "2022-06-13T17:12:20Z")
Hi msmith. It looks like you have one bad GCP. GCP 7525 shows -355 ft in the X and 160 in the Y. All of your other GCP look good. I would disable this since it appears to be erroneous. ![2022-06-13_11-08-00](https://global.discourse-cdn.com/pix4d/original/2X/a/ab6f512061bcd7b8329cc7d367bd361ee83156c5.png) As for your orthomosaic, this is difficult to say why it is stripped like this. However, I noticed that your GPU driver is quite out of date and out of date drivers can cause many processing issues. I suggest downloading the latest driver and reprocessing. > **[NVIDIA RTX / Quadro Desktop and Notebook Driver Release 515 | R515 U1 (516.25)...](https://www.nvidia.com/Download/driverResults.aspx/189746/en-us/)** > > Download the English (US) NVIDIA RTX / Quadro Desktop and Notebook Driver Release 515 for Windows 10 64-bit, Windows 11 systems. Released 2022.5.31