# "Failed to run a step"

**URL:** <https://community.pix4d.com/t/failed-to-run-a-step/30873>\
**Category:** PIX4Dmapper\
**Created:** [August 5, 2024, 2:15am UTC](https://community.pix4d.com/t/failed-to-run-a-step/30873 "2024-08-05T02:15:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jfjan](https://avatars.discourse-cdn.com/v4/letter/j/3be4f8/32.png) [@jfjan](https://community.pix4d.com/u/jfjan)\
**Post date:** [August 5, 2024, 2:15am UTC](https://community.pix4d.com/t/failed-to-run-a-step/30873/1 "2024-08-05T02:15:01Z")

</div>

Hello, I have a error to run step 2.

“ClusterProcessing: Not enough initialized photos”  
“GroupProcessing: No dense points were created from cluster 0”

 ![image](https://global.discourse-cdn.com/pix4d/original/2X/9/9698de6fb800848de96f8d817ae42e304abb9228.png)

How can I resolve it?

Regards,  
ChanHan Lu  
[report.xml](https://community.pix4d.com/uploads/short-url/gP8TstkVBSQxjXer5NI6Tpxm4tA.xml) (43.8 KB)

---

<div class="post-metadata">

**Author:** ![Kapil\_Khanal](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/kapil_khanal/32/304_2.png) [@Kapil\_Khanal](https://community.pix4d.com/u/Kapil_Khanal)\
**Post date:** [November 27, 2024, 5:35pm UTC](https://community.pix4d.com/t/failed-to-run-a-step/30873/2 "2024-11-27T17:35:29Z")

</div>

Hello, Looks like you are running out of the RAM. I would suggest upgrading the RAM size and trying the project again.