# Distortion in Both Multispectral and RGB sensor imagery **URL:** \ **Category:** PIX4Dmapper Questions/Troubleshooting\ **Created:** [June 5, 2025, 8:38pm UTC](https://community.pix4d.com/t/distortion-in-both-multispectral-and-rgb-sensor-imagery/33594 "2025-06-05T20:38:20Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![gistech.orchards](https://avatars.discourse-cdn.com/v4/letter/g/f14d63/32.png) [@gistech.orchards](https://community.pix4d.com/u/gistech.orchards)\ **Post date:** [June 5, 2025, 8:38pm UTC](https://community.pix4d.com/t/distortion-in-both-multispectral-and-rgb-sensor-imagery/33594/1 "2025-06-05T20:38:20Z")
Hello, We are processing imagery in Pix4D mapper and noticed distortion in the imagery. For the multispectral imagery, we are using the default options for AG multispectral and for the RGB imagery, we are using the default options in AG RGB. I was wondering if anyone seen this before and troubleshooting tips? ![image](https://global.discourse-cdn.com/pix4d/original/2X/3/3fb90cd4673865daf4f9b305a72734c5b8ed9911.jpeg) ---
**Author:** ![Kapil\_Khanal](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/kapil_khanal/32/304_2.png) [@Kapil\_Khanal](https://community.pix4d.com/u/Kapil_Khanal)\ **Post date:** [June 12, 2025, 10:52pm UTC](https://community.pix4d.com/t/distortion-in-both-multispectral-and-rgb-sensor-imagery/33594/2 "2025-06-12T22:52:07Z")
Hello @gistech.orchards, I would suggest you to go through the below support article, > **[Distortions and Artifacts in the Orthomosaic - PIX4Dmapper](https://support.pix4d.com/hc/en-us/articles/202561099)** > > Cause The orthomosaic is generated based on the DSM created from the Densified Point Cloud. Thereby, errors and noise present in the Densified Point Cloud will be reflected in the orthomosaic. These d The way to minimize those issue is by increasing the flight height (\> GSD) and increase image overlap and things suggested in above support article.