# Converting Temperature Units to Celsius **URL:** \ **Category:** PIX4Dmatic\ **Created:** [September 8, 2026, 9:58am UTC](https://community.pix4d.com/t/converting-temperature-units-to-celsius/34691 "2026-09-08T09:58:47Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![mwywial](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mwywial/32/7205_2.png) [@mwywial](https://community.pix4d.com/u/mwywial)\ **Post date:** [September 8, 2026, 9:58am UTC](https://community.pix4d.com/t/converting-temperature-units-to-celsius/34691/1 "2026-09-08T09:58:47Z")
Hello, Are you planning to add other units to the data representation, such as Celsius? I think this could be done in a similar way to how the decreases are shown (as percentages or degrees). Mathematically, it’s simple—you just need to subtract 273.15. ---
**Author:** ![Anastasis\_Spachos](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/anastasis_spachos/32/7061_2.png) [@Anastasis\_Spachos](https://community.pix4d.com/u/Anastasis_Spachos)\ **Post date:** [September 8, 2026, 12:28pm UTC](https://community.pix4d.com/t/converting-temperature-units-to-celsius/34691/2 "2026-09-08T12:28:24Z")
Hello @mwywial Converting Temperature units to Celsius, Kelvin, or Fahrenheit is already possible in PIX4Dmatic. You can convert the units either from the bottom bar inside the project or from **Preferences\> Display\> Units** as seen in the image below: ![image](https://global.discourse-cdn.com/pix4d/original/2X/8/8bfe6f463ab2eeedf0dec0a55274cdc8d907c2b1.jpeg) I hope this helps. Best regards, Spachos Anastasis ---
**Author:** ![mwywial](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/mwywial/32/7205_2.png) [@mwywial](https://community.pix4d.com/u/mwywial)\ **Post date:** [September 8, 2026, 12:43pm UTC](https://community.pix4d.com/t/converting-temperature-units-to-celsius/34691/3 "2026-09-08T12:43:37Z")
I didn’t see that; thanks for your help. You can close this thread.