# Controlling processing time

**URL:** <https://community.pix4d.com/t/controlling-processing-time/11729>\
**Category:** PIX4Dmapper Questions/Troubleshooting\
**Created:** [February 25, 2020, 12:29pm UTC](https://community.pix4d.com/t/controlling-processing-time/11729 "2020-02-25T12:29:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![nardone.raffaele.202](https://avatars.discourse-cdn.com/v4/letter/n/b9e5f3/32.png) [@nardone.raffaele.202](https://community.pix4d.com/u/nardone.raffaele.202)\
**Post date:** [February 25, 2020, 12:29pm UTC](https://community.pix4d.com/t/controlling-processing-time/11729/1 "2020-02-25T12:29:46Z")

</div>

I have generated the quality report of a project I created before to check its processing time again.  
I remeber it was written in the report the first time, but the second time I generated it, it was not present.  
Is there a way to control the processing time again please?

---

<div class="post-metadata">

**Author:** ![Beata](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/beata/32/187_2.png) [@Beata](https://community.pix4d.com/u/Beata)\
**Post date:** [February 25, 2020, 12:55pm UTC](https://community.pix4d.com/t/controlling-processing-time/11729/2 "2020-02-25T12:55:13Z")

</div>

Such a result happens when you are re-process the Quality Report after Step 1 was completed.

Unfortunately, there is no other way to trigger the time computation than running Step 1 again.

Regards

---

<div class="post-metadata">

**Author:** ![rsweeney](https://sea2.discourse-cdn.com/pix4d/user_avatar/community.pix4d.com/rsweeney/32/811_2.png) [@rsweeney](https://community.pix4d.com/u/rsweeney)\
**Post date:** [February 25, 2020, 6:39pm UTC](https://community.pix4d.com/t/controlling-processing-time/11729/3 "2020-02-25T18:39:58Z")

</div>

@nardone.raffaele.202 If you go into the .log file you can pull out the total time spent on any step.

---

<div class="post-metadata">

**Author:** ![nardone.raffaele.202](https://avatars.discourse-cdn.com/v4/letter/n/b9e5f3/32.png) [@nardone.raffaele.202](https://community.pix4d.com/u/nardone.raffaele.202)\
**Post date:** [February 28, 2020, 6:55pm UTC](https://community.pix4d.com/t/controlling-processing-time/11729/4 "2020-02-28T18:55:46Z")

</div>

Thanks @rsweeney.