# classification point cloud and DSM Model
**URL:** https://community.pix4d.com/t/classification-point-cloud-and-dsm-model/25321
**Category:** PIX4Dmapper
**Created:** [February 1, 2023, 1:16am UTC](https://community.pix4d.com/t/classification-point-cloud-and-dsm-model/25321 "2023-02-01T01:16:42Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@vxcaceres](https://community.pix4d.com/u/vxcaceres)
#### Post date: [February 1, 2023, 1:16am UTC](https://community.pix4d.com/t/classification-point-cloud-and-dsm-model/25321/1 "2023-02-01T01:16:42Z")
Hello
I drow and classificated some object as “disabilited”, then executed “classification point cloud. Then I have tried to make DSM model with no layer of “disabilited clasificarion point cloud (NDP), but the DSM result includes that part of the DSM model.
Thanks!
---
### Author:  [@Rosana\_Lin](https://community.pix4d.com/u/Rosana_Lin)
#### Post date: [February 2, 2023, 3:38am UTC](https://community.pix4d.com/t/classification-point-cloud-and-dsm-model/25321/2 "2023-02-02T03:38:15Z")
Hi @vxcaceres
Once you made changes by disabling the points, you can proceed with step 3 immediately after editing the points. The changes will not be saved if step 2 is run gain.
Also, the disabled points will only apply to the DSM and DTM but not the orthomosaic or a reflectance map.
For more information:
[[Tutorial video] How to edit the 3D Point Cloud](https://www.youtube.com/watch?v=N1kBU4Ethp4)
[How to edit the point cloud in the rayCloud](https://support.pix4d.com/hc/en-us/articles/202560499-How-to-edit-the-point-cloud-in-the-rayCloud?source=search)
I hope this helps. If the points are still showing in the DSM/DTM after running step 3 immediately, you could share with us some screenshots of the properly disabled points showing up in the DSM model. We are happy to take a closer look. 🙂
Best regards,
Rosana (she/her)